Steel Wire Reinforced Pipe Extrusion Line

Specification

Steel Wire Reinforced Pipe Extrusion Line

Using the wire wrapping technology, the polyethylene pipe has been reinforced by high strength steel wire in the middle layer. The composite structure results the pipe materials saving and pressure improving. The new technology can make the HDPE pipe stronger, durable and reduce the material cost definitely.

Two layers or four layers of steel wire are wrapped on the polyethylene core pipe. And the adhesive resin is filled in the space between the steel mesh and polyethylene; bond them to form a stable mesh structure. Then the steel reinforced layer is covered by a thin layer of polyethylene.

Main technical parameters:

Pipe Diameter, mm	50-160	75-250	110-315	160-400	250-500	315-630	500-800
Extruder	SJ65/45/45	SJ75/60/50	SJ75/60/55	SJ75/65/55	SJ90/65/55	SJ90/75/65	SJ120/90/75
Total power, kw	360/200	448/250	490/270	540/300	630/350	890/490	12450/690
LWH, m	544.52.7	604.72.8	654.72.8	654.72.8	664.72.9	745.42.9	766.03.0

Machine layout:

Products